Using Syslog
December 2005
© Foundry Networks, Inc.
A - 13
Critical
Authentication shut down <portnum> due to
DOS attack
Denial of Service (DoS) attack protection
was enabled for multi-device port
authentication on the specified <portnum>,
and the per-second rate of RADIUS
authentication attempts for the port
exceeded the configured limit. The Foundry
device considers this to be a DoS attack and
disables the port.
Debug
BGP4: Not enough memory available to run
BGP4
The device could not start the BGP4 routing
protocol because there is not enough
memory available.
Debug
DOT1X: Not enough memory
There is not enough system memory for
802.1X authentication to take place. Contact
Foundry Technical Support.
Error
No of prefixes received from BGP peer <ip-
addr> exceeds maximum prefix-
limit...shutdown
The Layer 3 Switch has received more than
the specified maximum number of prefixes
from the neighbor, and the Layer 3 Switch is
therefore shutting down its BGP4 session
with the neighbor.
Informational
<user-name> login to PRIVILEGED mode
A user has logged into the Privileged EXEC
mode of the CLI.
The <user-name> is the user name.
Informational
<user-name> login to USER EXEC mode
A user has logged into the USER EXEC
mode of the CLI.
The <user-name> is the user name.
Informational
<user-name> logout from PRIVILEGED
mode
A user has logged out of Privileged EXEC
mode of the CLI.
The <user-name> is the user name.
Informational
<user-name> logout from USER EXEC
mode
A user has logged out of the USER EXEC
mode of the CLI.
The <user-name> is the user name.
Informational
ACL <acl id> added | deleted | modified from
console | telnet | ssh | web | snmp session
A user created, modified, deleted, or applied
an ACL via the Web, SNMP, console, SSH,
or Telnet session.
Informational
Bridge is new root, vlan <vlan-id>,
root ID <root-id>
A Spanning Tree Protocol (STP) topology
change has occurred, resulting in the
Foundry device becoming the root bridge.
The <vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The <root-id> is the STP bridge root ID.
Table A.3: Foundry Syslog Messages (Continued)
Message Level
Message
Explanation
Summary of Contents for FastIron Edge Switch X424
