![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269027.webp)
Getting Familiar with Management Applications
December 2005
© Foundry Networks, Inc.
2 - 3
Line Editing Commands
The CLI supports the following line editing commands. To enter a line-editing command, use the CTRL-key
combination for the command by pressing and holding the CTRL key, then pressing the letter associated with the
command.
For a complete list of CLI commands and syntax information for each command, see the
Foundry Switch and
Router Command Line Interface Reference
.
Using Slot and Port Numbers with CLI Commands
Many CLI commands and displays use port numbers, or slot numbers with port numbers. The ports are labeled
on the front panel of the device.
The FSX uses chassis-based port numbering which consists of a slot number and a port number. When you enter
CLI commands on the FSX, you must specify both the slot number and the port number. The FESX and FWSX
devices do not use this type of numbering. When you enter commands on these devices, just specify the port
number. The slot numbers used in the FSX CLI examples apply only to Chassis devices.
Here is an example. The following commands change the CLI from the global CONFIG level to the configuration
level for the first port on the device.
•
FSX commands:
FastIron SuperX Switch(config)# interface e 1/1
FastIron SuperX Switch(config-if-1/1)#
Table 2.2: CLI Line Editing Commands
Ctrl-Key Combination
Description
Ctrl-A
Moves to the first character on the command line.
Ctrl-B
Moves the cursor back one character.
Ctrl-C
Escapes and terminates command prompts and ongoing tasks
(such as lengthy displays), and displays a fresh command prompt.
Ctrl-D
Deletes the character at the cursor.
Ctrl-E
Moves to the end of the current command line.
Ctrl-F
Moves the cursor forward one character.
Ctrl-K
Deletes all characters from the cursor to the end of the command
line.
Ctrl-L; Ctrl-R
Repeats the current command line on a new line.
Ctrl-N
Enters the next command line in the history buffer.
Ctrl-P
Enters the previous command line in the history buffer.
Ctrl-U; Ctrl-X
Deletes all characters from the cursor to the beginning of the
command line.
Ctrl-W
Deletes the last word you typed.
Ctrl-Z
Moves from any CONFIG level of the CLI to the Privileged EXEC
level; at the Privileged EXEC level, moves to the User EXEC level.
Summary of Contents for FastIron Edge Switch X424
