![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269735.webp)
Using Syslog
December 2005
© Foundry Networks, Inc.
A - 9
•
lpr – line printer subsystem
•
news – netnews subsystem
•
uucp – uucp subsystem
•
sys9 – cron/at subsystem
•
sys10 – reserved for system use
•
sys11 – reserved for system use
•
sys12 – reserved for system use
•
sys13 – reserved for system use
•
sys14 – reserved for system use
•
cron – cron/at subsystem
•
local0 – reserved for local use
•
local1 – reserved for local use
•
local2 – reserved for local use
•
local3 – reserved for local use
•
local4 – reserved for local use
•
local5 – reserved for local use
•
local6 – reserved for local use
•
local7 – reserved for local use
Displaying the Interface Name in Syslog Messages
By default, an interface’s slot number (if applicable) and port number are displayed when you display Syslog
messages. If you want to display the name of the interface instead of its number, enter the following command:
FESX424 Router(config)# ip show-portname
This command is applied globally to all interfaces on Layer 2 Switches and Layer 3 Switches.
Syntax:
[no] Ip show-portname
When you display the messages in the Syslog, you see the interface name under the Dynamic Log Buffer section.
The actual interface number is appended to the interface name. For example, if the interface name is "lab" and its
port number is "2", you see "lab2" displayed as in the example below:
FESX424 Router# show logging
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Buffer logging: level ACDMEINW, 3 messages logged
level code: A=alert C=critical D=debugging M=emergency E=error
I=informational N=notification W=warning
Static Log Buffer:
Dec 15 19:04:14:A:Fan 1, fan on right connector, failed
Dynamic Log Buffer (50 entries):
Dec 15 18:46:17:I:Interface ethernet
Lab2
, state up
Dec 15 18:45:15:I:Warm start
Clearing the Syslog Messages from the Local Buffer
To clear the Syslog messages stored in the Foundry device’s local buffer, enter the following command:
FESX424 Router# clear logging
Summary of Contents for FastIron Edge Switch X424
