![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269758.webp)
Foundry Configuration Guide for the FESX, FSX, and FWSX
A - 32
© Foundry Networks, Inc.
December 2005
Warning
Dup IP <ip-addr> detected, sent from MAC
<mac-addr> interface <portnum>
Indicates that the Foundry device received a
packet from another device on the network
with an IP address that is also configured on
the Foundry device.
The <ip-addr> is the duplicate IP address.
The <mac-addr> is the MAC address of the
device with the duplicate IP address.
The <portnum> is the Foundry port that
received the packet with the duplicate IP
address. The address is the packet’s source
IP address.
Warning
list <acl-num> denied <ip-proto>
<src-ip-addr> (<src-tcp/udp-port>)
(Ethernet <portnum> <mac-addr>) ->
<dst-ip-addr> (<dst-tcp/udp-port>),
1 event(s)
Indicates that an Access Control List (ACL)
denied (dropped) packets.
The <acl-num> indicates the ACL number.
Numbers 1 – 99 indicate standard ACLs.
Numbers 100 – 199 indicate extended ACLs.
The <ip-proto> indicates the IP protocol of
the denied packets.
The <src-ip-addr> is the source IP address
of the denied packets.
The <src-tcp/udp-port> is the source TCP or
UDP port, if applicable, of the denied
packets.
The <portnum> indicates the port number on
which the packet was denied.
The <mac-addr> indicates the source MAC
address of the denied packets.
The <dst-ip-addr> indicates the destination
IP address of the denied packets.
The <dst-tcp/udp-port> indicates the
destination TCP or UDP port number, if
applicable, of the denied packets.
Warning
Locked address violation at interface
e<portnum>, address <mac-address>
Indicates that a port on which you have
configured a lock-address filter received a
packet that was dropped because the
packet’s source MAC address did not match
an address learned by the port before the
lock took effect.
The e<portnum> is the port number.
The <mac-address> is the MAC address that
was denied by the address lock.
Assuming that you configured the port to
learn only the addresses that have valid
access to the port, this message indicates a
security violation.
Table A.3: Foundry Syslog Messages (Continued)
Message Level
Message
Explanation
Summary of Contents for FastIron Edge Switch X424
