![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269611.webp)
Configuring BGP4
December 2005
© Foundry Networks, Inc.
21 - 39
Redistributing OSPF External Routes
To configure the Layer 3 Switch to redistribute OSPF external type 1 routes, enter the following command:
FESX424 Router(config-bgp-router)# redistribute ospf match external1
Syntax:
redistribute ospf [match internal | external1 | external2] [metric <num>] [route-map <map-name>]
The
ospf
parameter indicates that you are redistributing OSPF routes into BGP4.
The
match internal | external1 | external2
parameter applies only to OSPF. This parameter specifies the types
of OSPF routes to be redistributed into BGP4. The default is internal.
NOTE:
If you do not enter a value for the
match
parameter, (for example, you enter r
edistribute ospf
only) then
only internal OSPF routes will be redistributed.
The
metric
<num> parameter changes the metric. You can specify a value from 0 – 4294967295. The default
is 0.
The
route-map
<map-name> parameter specifies a route map to be consulted before adding the OSPF route to
the BGP4 route table.
NOTE:
The route map you specify must already be configured on the router. See “Defining Route Maps” on
page 21-48 for information about defining route maps.
NOTE:
If you use both the
redistribute ospf route-map
<map-name> command and the
redistribute ospf
match internal | external1 | external2
command, the software uses only the route map for filtering.
Redistributing Static Routes
To configure the Layer 3 Switch to redistribute static routes, enter the following command:
FESX424 Router(config-bgp-router)# redistribute static
Syntax:
redistribute static [metric <num>] [route-map <map-name>]
The
static
parameter indicates that you are redistributing static routes into BGP4.
The
metric
<num> parameter changes the metric. You can specify a value from 0 – 4294967295. The default
is 0.
The
route-map
<map-name> parameter specifies a route map to be consulted before adding the static route to
the BGP4 route table.
NOTE:
The route map you specify must already be configured on the router. See “Defining Route Maps” on
page 21-48 for information about defining route maps.
Disabling or Re-Enabling Re-Advertisement of All Learned
BGP4 Routes to All BGP4 Neighbors
By default, the Layer 3 Switch re-advertises all learned best BGP4 routes to BGP4 neighbors, unless the routes
are discarded or blocked by route maps or other filters.
If you want to prevent the Layer 3 Switch from re-advertising a learned best BGP4 route unless that route also is
installed in the IP route table, use the following CLI method.
To disable re-advertisement of BGP4 routes to BGP4 neighbors except for routes that the software also installs in
the route table, enter the following command:
FESX424 Router(config-bgp-router)# no readvertise
Syntax:
[no] readvertise
Summary of Contents for FastIron Edge Switch X424
