![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269714.webp)
Foundry Configuration Guide for the FESX, FSX, and FWSX
23 - 2
© Foundry Networks, Inc.
December 2005
Only one flash device is active at a time. By default, the primary image will become active upon reload.
You can update the software contained on a flash module using TFTP to copy the update image from a TFTP
server onto the flash module. In addition, you can copy software images and configuration files from a flash
module to a TFTP server.
NOTE:
Foundry devices are TFTP clients but not TFTP servers. You must perform the TFTP transaction from
the Foundry device. You cannot “put” a file onto the Foundry device using the interface of your TFTP server.
NOTE:
If you are attempting to transfer a file using TFTP but have received an error message, see “Diagnostic
Error Codes and Remedies for TFTP Transfers” on page 23-13.
Determining the Software Versions Installed and Running on a Device
Use the following methods to display the software versions running on the device and the versions installed in
flash memory.
Determining the Flash Image Version Running on the Device
To determine the flash image version running on a device, enter the
show version
command at any level of the
CLI. Some examples are shown below.
FESX, and FWSX Devices
To determine the flash image version running on a FESX, or FWSX
device, enter the
show version
command at
any level of the CLI. The following shows an example output.
The version information is shown in bold type in this example.
•
“03.0.00T53” indicates the flash code version number. The “T53” is used by Foundry for record keeping.
•
“labeled as FER03000” indicates the flash code image label. The label indicates the image type and version
and is especially useful if you change the image file name.
•
“Primary fer03000.bin” indicates the flash code image file name that was loaded.
FESX424 Router# show version
SW: Version
03.0.00T53
Copyright (c) 1996-2002 Foundry Networks, Inc.
Compiled on Mar 26 2003 at 13:50:31
labeled as FER03000
(3089381 bytes) from
Primary fer03000.bin
HW: Stackable FES2402-PREM-ILP
==========================================================================
330 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus
512 KB boot flash memory
16384 KB code flash memory
128 MB DRAM
Monitor Option is on
The system uptime is 4 days 4 hours 8 minutes 33 seconds
The system : started=warm start
Summary of Contents for FastIron Edge Switch X424
