![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269215.webp)
Configuring Trunk Groups and Dynamic Link Aggregation
December 2005
© Foundry Networks, Inc.
10 - 11
The <portnum> parameter specifies an individual port. You can enter this parameter multiple times to specify a
list, as shown in the examples above.
Deleting a Trunk Group
To delete a trunk group, use “
no
” in front of the command you used to create the trunk group. For example, to
remove one of the trunk groups configured in the examples above, enter the following command:
FastIron SuperX Router(config)# no trunk ethernet 1/1 to 1/2 ethernet 3/3 to 3/4
Syntax:
no trunk ethernet [<slotnum>/]<portnum> to [<slotnum>/]<portnum>
The <slotnum> parameter is required on chassis devices.
Displaying Trunk Group Configuration Information
To display configuration information for the trunk groups, use the
show trunk
command. This command displays
information for configured trunk groups and operational trunk groups. A configured trunk group is one that has
been configured in the software but has not been placed into operation by a reset or reboot. An operational trunk
group is one that has been placed into operation by a reset or reboot.
Enter the following command at any CLI level:
Syntax:
show trunk [ethernet [<slotnum>/]<portnum> to [<slotnum>/]<portnum>]
FastIron SuperX Router(config)# show trunk
Configured trunks:
Trunk ID: 1
HW Trunk ID: 1
Ports_Configured: 8
Primary Port Monitored: Jointly
Ports 1/1 1/2 1/3 1/4 1/5 1/6 1/7 1/8
Port Names none none none none none longna test none
Port_Status enable enable enable enable disable disable enable enable
Monitor on on off on off off off off
Mirror Port 3/3 3/4 N/A 3/5 N/A N/A N/A N/A
Monitor Dir both in N/A out N/A N/A N/A N/A
Operational trunks:
Trunk ID: 1
HW Trunk ID: 1
Duplex: Full
Speed: 1G
Tag: No
Priority: level0
Active Ports: 6
Ports 1/1 1/2 1/3 1/4 1/5 1/6 1/7 1/8
Link_Status active active active active down down active active
LACP_Status ready ready ready expired down down ready ready
Load Sharing
Mac Address 3 2 2 2 0 0 6 1
IP 0 0 0 0 0 0 0 0
Multicast 4 2 5 2 0 0 2 3
Summary of Contents for FastIron Edge Switch X424
