-84-
Model UR-2 <MENU mode / STORAGE UTILITY menu>
(4)
Use the [MENU] dial to select "USB" and press
the [ENTER] key.
You can copy any desired files on the current
storage device (SD card or USB memory) to an-
other storage device (SD card or USB memory).
The following shows the procedure for copying
files from an SD card to a USB memory. It is as-
sumed that the SD card is set to the SD-1 slot and
selected as the current storage device, while the
display shows the STORAGE UTILITY menu.
(1)
Use the [MENU] dial to highlight "File copy" and
press the [ENTER] key.
The display shows the file list of the current
storage device (in this procedure example,
the SD card is set to the SD-1 slot).
Copying files
(2)
Use the [MENU] dial to highlight a copy source
file and press the [ENTER] key.
A checkmark is added to the left of the
selected file.
By repeating this step, you can add
checkmarks to multiple files.
Pressing the [
] key moves up to the first
entry in the list, while pressing the [
] key
moves down to the last entry in the list.
(3)
Use the [MENU] dial to highlight "Destination"
below "<All Select>" and press the [ENTER] key.
You can now select the copy destination.
<Memo>:
By highlighting "<All Select>" at
the bottom of the file list, you can add
checkmarks to all the files.
Flashing
<Note>:
If you want to copy all files in
the chain play list (CHAINLIST.CSV) or
in the timer play list (TIMERLIST.CSV)
in the copy source storage device, it is
recommended to select "<All Select>".
If any file in the list is not copied, you
cannot correctly execute chain list play
or timer play with the copy destina-
tion storage device.
<Note>:
Do not unplug the power cable (of
the AC adaptor or external battery) or remove
the storage device from the unit during file
copy.
Flashing
Summary of Contents for UR-2
Page 95: ......
