manualshive.com logo in svg

Fostex UR-2, Owner'S Manual

Share
Download
Fostex UR-2 Owner'S Manual Download Page 58

-58-

 Model UR-2 <Playback>

Power on play function

Mono mix function

<Note>: 

To activate power on play, a storage

device on which one or more audio files are re-
corded must be set before the power is turned
on.

Flashing

<Note>: 

When the play mode is set to "MEMORY",

the unit does not automatically start playback
after the power is turned on even if the power
on play function is set to "On".

Flashing

<Memo>: 

When the "Mono Mix" item is set to

"On", the Home screen of the file looks like
the following.

<Note>: 

To use a timer for power on play, fol-

low the procedure below.

1) Turn off the unit.
2) Connect a timer to the unit.
3) Set the timer appropriately.
4) Press the [POWER] switch to "On" (up)

position.

<Note>: 

When more then one folder exists on

the current storage, the power on play func-
tion does not work. The unit brings up the folder
selection screen and stops after it is turned on
(see page 29).

The "Power On Play" function automatically
starts playback after the unit is turned on.

By highlighting "Power On Play" in the PLAY
SETUP menu and pressing the [ENTER] key,
the current setting starts flashing and you can
now select on or off. (By default, "Off" is se-
lected.)

Use the [MENU] dial to select "On" or "Off"
and press the [ENTER] key to confirm the se-
lection.

You can mix stereo playback audio to mono.

By highlighting "Mono Mix" in the PLAY SETUP
menu and pressing the [ENTER] key, the cur-
rent setting starts flashing and you can now
select on or off. (By default, "Off" is selected.)

Use the [MENU] dial to select "On" or "Off"
and press the [ENTER] key to confirm the se-
lection.

Off

On

options

Details

After the power is turned on, the unit
stops at the beginning of the file.

After the power is turned on, the unit au-
tomatically starts playback in the current
play mode.

Off

On

options

Details

Audio is output in stereo.
When playing back a mono audio file, the
same audio is output from both the left
and right output channels.

The left and right channels of stereo au-
dio are mixed together.
When playing back a mono audio file, the
same audio is output from both the left
and right output channels.

Summary of Contents for UR-2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands