-60-
Model UR-2 <Locate/skip>
Locating the beginning of a file
While the unit is stopped, by holding down the
[STOP] key and pressing the [REW] key, the unit
locates the beginning (ABS 0) of the current file
and stops.
Locating the end of a file
While the unit is stopped, by holding down the
[STOP] key and pressing the [F FWD] key, you
can locate the last recording position (REC END)
of the current file and stops.
Locating a CUE point
By selecting a desired CUE from the CUE list of
the current file you can locate the CUE point.
(1)
While the unit is stopped, press the
[CUE/LOCATE] key.
The display shows the CUE LIST screen.
(2)
Use the [MENU] dial to select a desired CUE
and press the [CUE/LOCATE] key again.
The unit locates the selected CUE point and
the display returns to the Home screen.
Locating a position by specifying the time
You can locate a position on the current file by
specifying the time.
(1)
While the unit is stopped or during playback,
press the [
SHIFT
] key to turn on the shift mode
followed by the [CUE/LOCATE] key.
The time when you press the [CUE/LOCATE]
key is hold and the display shows the time
editing screen.
(2)
Enter the time of the position you want to locate.
To edit the time, use the [
] and [
] keys
to select the flashing point and use the [MENU]
dial to enter a desired value (you can also edit
the time using a USB keyboard).
(3)
After you enter the time, press the [ENTER] key.
The unit immediately locates the specified
position and stops.
Flashing
Direct locate using the numeric keys
While a USB keyboard is connected to the unit,
you can use the numeric (0 through 9) and [Del
/.] keys to specify a desired file number and lo-
cate the file.
To specify a one-digit file number, simply press
a corresponding numeric key (0 through 9).
The [Del /.] key functions as "+10" key so you
can specify any two- or three-digit file number
by pressing this key as many times as required,
followed by any numeric key. For example, to
specify file number "28", press the [Del /.] key
twice followed by the [8] key.
<Memo>:
If you execute the operation below
during playback while the "Auto play" menu item
in the PLAY SETUP menu of the MENU mode is
set to "On", the unit automatically starts play-
back after locating a CUE point. (By default, the
"Auto play" menu item is set to "On".)
<Memo>:
If you execute the operation below
during playback while the "Auto play" menu item
in the PLAY SETUP menu of the MENU mode is
set to "On", the unit automatically starts play-
back after locating the specified position. (By
default, the "Auto play" menu item is set to "On".)
<Memo>:
If you execute the operation above
while the "Auto play" menu item in the PLAY
SETUP menu of the MENU mode is set to "On",
the unit automatically starts playback after lo-
cating the file. (By default, the "Auto play" menu
item is set to "On".)
Summary of Contents for UR-2
Page 95: ......
