Fostex UR-2, Owner'S Manual

Page: 34 / 96

Model UR-2 <Recording>
-34-
<When recording a microphone source>
By pressing the [MIC IN] key to turn on the [MIC
IN] indicator, you can record a microphone
source. (When [MIC IN] is active, the line input
is inactive.) The microphone input level can be
adjusted using the [MIC GAIN] control.
You can record a microphone source, as well as
record a narration between songs.
MAX MIN MAX MIN
MIC GAIN MIC IN INPUT LEVEL
ABS 0
REC END
REC RDY EXIT MIC IN
PHANTOM
MIC SET
FILE/CURSOR
MENU / ENTER
REC STOP PLAY REW F FWD
MRGN RST CUE PREV NEXT
CUE/LOCATE
TIME EDIT
[MIC IN] key
[MIC GAIN] control
When [MIC IN] is active, the display shows " "
instead of " " (or " ").
If you switch to [MIC IN] when "Digital" is se-
lected, the microphone source is recorded with
reference to the digital clock of the digital in-
put signal.
<When recording a digital source>
If you press the [REC RDY] key to enter the in-
put monitor mode while the unit receives a cor-
rect digital signal from the [DIGITAL INPUT] con-
nector and the "Input SEL." menu item is set to
"DIGITAL", the "
" icon turns on. A digital
signal is directly recorded to the unit at the digi-
tal signal level so you do not have to adjust the
level. Note that the FS and bit length of the re-
cording file follow the “Record FS/bit” menu
item setting, so you must set this item to match
the digital input signal.
<Note>:
When " " quickly flashes, the unit
does not lock to the digital signal. In such a
case, check cable connection and setting of
the external digital device.
Checking the remaining time
Before you start recording, it is recommended to
check the remaining recording time of the current
storage.
By pressing the [TIME]/[
REPEAT
] key in the input
monitor mode, the screen changes from time dis-
play to remaining display. (Each press of the key
switches between these displays).
ABS 0
REC END
READY
EJECT
AUTO PLAY
SHIFT MODE
PLAY
TIME REC RDY EXIT
EDIT REPEAT
FILE SEL DISPLAY
MENU / ENT
REC STOP PLAY
MRGN RST
STRG SEL
SD-2 SD-1
UR-2
STEREO RACK MEMORY RECORDER
[TIME] / [
REPEAT
]
key
<Remaining display>
The screen above shows that the current storage
device has a space for recording 1 hour 25 minutes
12 seconds of a stereo file at 44.1 kHz/16 bit.
<Time display>
<Memo>: You can reset the margin level value
by pressing the [EXIT]/[
MRGN RST
] key in the shift
mode.