manualshive.com logo in svg

Fostex UR-2, Owner'S Manual

Share
Download
Fostex UR-2 Owner'S Manual Download Page 12

-12-

Model UR-2 <Introduction / Overview>

Overview

Main features

• In addition to the balanced (XLR) and

unbalanced (RCA) analog inputs/outputs, the
unit provides the digital input and output
(XLR) ports.

• The organic electroluminescence display

provides high level of visibility including wide
viewing angle and high contract.

• Supports external controls via the footswitch,

parallel remote (D-sub 25-pin connector) and
RS232C (D-sub 9-pin connector).

• A dedicated USB port for a USB keyboard is

provided. You can edit a file name as well as
control the transport from a USB keyboard.

• By adopting DC power supply, you can

supply power from an external battery as well
as from the AC adaptor.
This is a great advantage for outdoor event or
location recording.

•␣ By installing the optional MIDI port (available

soon), you can use MMC and MTC.

• You can make stereo or mono recording/

playback of the WAV (BWF) file using an SD
card or USB memory.

•␣ You can make recording at "16-bit,  44.1 or

48 kHz" or "24-bit, 44.1, 48, 88.2 or 96 kHz".

• A USB 2.0 port is provided for high-speed file

transfer between a computer and the UR-2.

• The unit is equipped with two SD card slots

and a USB port ([USB-HOST]) dedicated for a
USB memory. You can record a file to an SD
card or a USB memory. You can even make
continuous playback over storage devices.
Note that you cannot use a USB memory while
a computer is connected to the [USB-PC] port.

• Supporting the FAT file format, you can use

an SD card or a USB memory which has been
used with the unit to a computer.

• Comprehensive playback functions including

chain play and memory play allow you to use
the unit in various circumstances.

• Functions such as timer play or power-on play

are useful for an audio installation system.
You can ring a chime or broadcast a regular
announcement.

• Each play mode list can be created in the form

of CSV format, allowing editing easily using a
text editor or a spreadsheet software on PC.

• When creating the chain play list, you can

fine-adjust the start and end points by
checking the waveform on the display using
the digital scrub function.

• A microphone input connector supporting the

+48 V phantom power is provided on the front
panel. Not only you can record a microphone
source, but also you can mix an
announcement from the microphone with the
playback sound.

Summary of Contents for UR-2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands