-75-
Model UR-2 <MENU mode / SYSTEM SETUP menu>
You can select stereo or mono recording mode.
The setting is stored to the internal flash ROM.
By using the [MENU] dial to highlight "Record
CH." in the SYSTEM SETUP menu and pressing
the [ENTER] key, the current setting starts flash-
ing and you can now select stereo or mono (the
default setting is "Stereo").
Use the [MENU] dial to select the desired option
and press the [ENTER] key to confirm the set-
ting.
Selecting stereo or mono recording mode
<When "Stereo" is selected (default)>
<When "Mono" is selected>
<Memo>:
Depending on the selection, the Home
screen looks like below.
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
You can select the maximum length (capacity)
for recording.
When you import a file to a computer, the maxi-
mum file length may be limited by the computer.
Therefore you should set the maximum length
of a file recorded by the unit appropriately.
The maximum length of a file recorded by the
unit can be set to 4 GB (default) or 2 GB.
The setting is stored to the internal flash ROM.
By using the [MENU] dial to highlight "Max. file
length" in the SYSTEM SETUP menu and pressing
the [ENTER] key, the current setting starts flash-
ing and you can now select the maximum length
of a file (the default setting is "4G").
<Note>:
When you use a storage device whose
recording capacity is smaller than the setting
above, the maximum file length is limited by the
capacity of the device.
Setting the maximum file length
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
Flashing
Flashing
Summary of Contents for UR-2
Page 95: ......
