-37-
Model UR-2 <Recording>
Pressing the [ENTER] key again deletes the selected
CUE point from the list.
<Memo>:
In the CUE number of the CUE LIST
screen where the CUE point has been deleted, no
CUE label is shown and the time data shows "--h-
-m--s--f".
• Setting a new CUE point using the CUE
LIST screen
While the CUE LIST screen is shown, you can add a
new CUE point.
Use the [MENU] dial to highlight a CUE number
where no CUE point is set in the CUE LIST ("CUE 05"
in the screen example below), and press the [EN-
TER] key.
The time data of the current position when you press
the [ENTER] key is stored as CUE 05.
By pressing the [STOP] key (or [EXIT] key repeat-
edly), you can exit CUE editing mode.
Summary of Contents for UR-2
Page 95: ......
