-78-
Model UR-2 <MENU mode / SYSTEM SETUP menu>
You can save system memory data which con-
tains settings in the SYSTEM SETUP menu, PLAY
SETUP menu, etc. to the internal flash ROM or
the current storage device. See the next page for
the data to be saved.
The saved data can be loaded to the UR-2 so you
can apply the same system settings to multiple
UR-2 units, or you can apply the desired system
settings by loading a set of typical settings.
By using the [MENU] dial to highlight "SYS. user
save" in the SYSTEM SETUP menu and pressing
the [ENTER] key, the display shows the screen
for selecting the destination.
By using the [MENU] dial to select "Internal
FROM" or "Current device" and pressing the [EN-
TER] key, the following screen appears. Pressing
the [ENTER] key again executes the save opera-
tion. (The following shows the screen example
when selecting "Internal FROM".)
Saving system memory data
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
When you connect a USB keyboard to the [USB
(KYBD ONLY), select the USB keyboard type ("US"
or "JAPAN") correctly.
The setting is stored to the internal flash ROM.
By using the [MENU] dial to highlight "Keyboard
type" in the SYSTEM SETUP menu and pressing
the [ENTER] key, the current setting starts flash-
ing and you can now select the keyboard type
(the default setting is "US").
Use the [MENU] dial to select the type between
"US" and "JAPAN", and press the [ENTER] key to
confirm the setting.
Setting the USB keyboard type
US
Select when you connect a US keyboard.
JAPAN
Select when you connect a Japanese key-
board.
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
Internal
FROM
Data is saved to the internal Flash ROM.
Current
device
Data is saved to the current storage device
(SD1, SD2 or USB).
After finishing the save operation, "Completed"
is shown. See the table in the next page for the
contents of the data to be saved.
Flashing
Flashing
Summary of Contents for UR-2
Page 95: ......
