Forum SDL-100/1, Operation Manual

Page: 38 / 50

38
SDL PN: 651520-Y-BC-D - Revision: 10 04-2016
Operating Instructions
D
R
A
WIN
G
S
6 Service
INFO
Operational safety and readiness of the machine
do not only depend on your skill, but also on
maintenance and servicing of the machine. Insist
on using original spare parts when carrying
out maintenance and repair work. This ensures
operational safety and readiness of your machine,
and maintains its value.
6.1 Malfunction
If a malfunction occurs or the SDL does not operate as
expected, trouble shoot as follows:
If the cause of the malfunction cannot be determined
and remedied, contact Forum B + V Oil Tools Technical
Support.
1. Check hydraulic connections and hydraulic lines.
2. Check whether the on board hydraulic mains support
is present.
3. Check whether the Adapter and Bushings have been
installed for the size/type of pipe used.
4. Check for proper lubrication of the SDL.
5. Check feedback (from slip) for proper function.
6. Collect all information on the malfunction and define
the problem.
7. Attempt to find a quick solution to the problem.
8. Check the last changes/modifications.
9. Isolate the problem.
10. Replace any defective components.
INFO
In the event of problems, which cannot be
remedied with the aid of this manual, please
contact the Forum B + V Oil Tools Technical
Support or one of the authorized service
companies specified in Chapter 1.9.
6.2 Repair
6.2.1 Repair by Customer
It is only permissible for the customer/company operating
the machine to replace defective parts with OEM
(Original Equipment Manufacturer) parts approved by
Forum B + V Oil Tools in conformance with the present
operating instructions.
Use of parts not approved by Forum B + V Oil Tools voids
the guarantee.
6.2.2 Repair by Manufacturer
Ensure that any repair work required on the SDL is
performed only by Forum B + V Oil Tools or an authorized
service company.
INFO
Please contact the Forum B + V Oil Tools
Technical Support or one of the authorized
service companies specified in Chapter 1.9 to
perform repair or maintenance work.
6.2.3 Securing Screws with Nord Lock washers
Nord Lock bolt securing systems use geometry to safely
lock bolted joints in the most critical applications. The
key is the difference in angles. Since the cam angle „●“
is larger than the thread pitch „●“, the pair of washers
expands more than the corresponding pitch of the thread.
Any attempt from the bolt/nut to rotate loose is blocked by
the wedge effect of the cams.
When the pushed movements of the device will get in
contact with the under surface of the securing plate, this
surface contact will secure the plate and prevents any
motion in the axial direction.
Fig. 23: Nord Lock Washer detialed/principle illustration