Forum SDL-100/1, Operation Manual

Page: 35 / 50

5.10 Cleaning
WARNING
Health hazards from service
products!
Splashes of diluted drilling mud and
small parts.
» ALWAYS wear your personal
protective equipment.
WEAR EYE PROTECTION!
WEAR PROTECTIVE GLOVES!
The operating conditions and operating environment result
in contamination on the SDL. Remove this contamination
regularly to prevent incrustation and ensure safe operation
of the machine. To clean shut off the SDL, disconnect from
hydraulic system and lift out of rotary table. Remove upper
ring and slip assembly.
5.10.1 Time of Cleaning
Clean contamination from drilling from the SDL regularly.
The machine should be cleaned thoroughly at the end of
each shift at the latest. Also observe the instructions in
Chapter 6.4.
5.10.2 Procedure and Cleaning Agents
Forum B + V Oil Tools recommends cleaning the SDL with
a high pressure steam cleaner. Use it to clean the body and
slip assembly thoroughly from inside and outside. Clean
particularly the shoulder inclines on the body, upper ring
and slips. Then lubricate the sliding surfaces as specified in
Chapter.
35
04-2016 PN: 651520-Y-BC-D - Revision: 10 SDL
Operating Instructions
IN
SP
EC
TI
O
N /
M
AI
N
TE
NAN
C
E