3.3
Safe Lifting Points
Lifting point locations, especially bores for load hooks are
marked on the device.
Make Sure all load hooks and slings are fully installed in
the Lifting Point.
Thus, the safe transport of the equipment is ensured.
RNOTE
a
d
etailed
weight
specifications
are
given
in
the
c
hapter
d
escription
, s
ection
“t
echnical
d
ata
”.
3.4
Lifting arrangement
Fasten the lifting material on SDL lifting points.
Lift the SDL slightly to tension the lifting material.
WARNRNG
a
d
anger
of
collision
with
swinging
loads
!
e
nsure
that
no
one
is
present
in
the
swing
range
of
the
machine
.
Fig. 11: Hoisting points for transport SDL
1. Lift the SDL.
2. Move the SDL to the installation location.
3. Set the SDL down carefully on a suitable surface.
3.5
Mounting the SDL to elevator links
Preparation
1. Remove the transport packaging and transport aids
from the SDL.
2. Install the approbate bushings to the SDL in order to
ensure safe hoisting.
3. Position the SDL on the rig near the links.
Mounting the SDL to elevator links
1. Place the elevator on a plane surface.
2. After the elevator has been placed on the ground
the link adapter
can be opened.
3. Move Link block stake upwards.
4. Move the lower opening of the links over the lifting
ears of the SDL.
5. Tighten screws with 231 lbf-ft / 313 Nm.
6. Place and secure the joint with the safety spring.
WARNRNG
a
p
inching
and
crushing
! t
he
links
must
be
handled
and
guided
from
the
outside
of
the
l
ifting
ear
opening
of
the
sdl . u
se
ropes
to
adjust
the
links
. d
anger
z
one
for
o
perator
! w
hen
door
is
opem
never
place
human
body
or
limb
in
the
space
between
elevator
b
ody
and
door
.
WARNRNG
a
c
orrect
seating
of
l
inks
! always
check
the
correct
seat
of
the
levator
in
the
elevator
links
before
lifting
process
. t
he
e
levator
must
fit
in
correct
position
as
shown
. always
perform
a
visual
check
of
the
link
seat
in
the
sdl
after
the
mount
procedure
.
Fig. 12: Mounting the SDL to elevator links
21
04-2016
PN: 651520-Y-BC-D - Revision: 10 SDL
Operating Instructions
IN
STA
LL
AT
IO
N
Summary of Contents for SDL-100/1
