Forum SDL-100/1, Operation Manual

Page: 22 / 50

3.6 Installation Checklist SDL Elevator
Functional test
OK Close elevator.
OK Open elevator.
OK Check loose service tools are removed from the elevator.
Check and Lubrication
OK Check for any damage and repair if needed.
OK Check elevator can be closed properly.
OK Apply grease to all greasing points until grease is visibly coming out of the bores.
OK Check of all bolts, nuts, washers and lock wire are in place.
OK Check correct setting of latch.
22
SDL PN: 651520-Y-BC-D - Revision: 10 04-2016
Operating Instructions
IN
STA
LL
AT
IO
N