Removing a FortiMail board
FortiMail-5001A hardware installation
FortiMail™ Secure Messaging PlatformVersion 4.0 Patch 1Install Guide
60
Revision 2
3
Fully loosen the retention screws on the FortiMail front panel.
4
Unlock the handles by squeezing both handle locks.
5
Open the handles to their fully open positions.
You need to open the handles with moderate pressure to eject the board from the
chassis. Pivoting the handles turns off the microswitch, turns off all LEDs, and ejects
the board from the chassis slot.
6
Pull the board about half way out.
7
Turn both handles to their fully-closed positions.When the FortiMail handles are fully-
closed they lock into place.
8
Carefully slide the board completely out of the slot.
9
Re-attach the protective metal frame before shipping or storing the FortiMail board.
Loosen
Retention
Screw
Caution:
To avoid damaging the lock, make sure you squeeze the handles fully to unlock
them before opening. The handles should pop easily out of the board front panel.
Handle
Alignment Pin
Open
Alignment Pin
Lock
Handle
Fully Closed
and Locked
Alignment Pin
Handle
Close
Alignment Pin
Handle
Summary of Contents for FortiMail-100
Page 1: ...FortiMail Secure Messaging Platform Version 4 0 Patch 1 Install Guide...
Page 173: ...www fortinet com...
Page 174: ...www fortinet com...
