Fortinet FortiMail-100 Install Manual Download Page 38

Page: 38 / 174

Mounting the FortiMail unit

FortiMail-2000B hardware installation

FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide

Revision 2

http://docs.fortinet.com/

•

Feedback

Figure 5: Engaging and releasing the slam latch

• The latches engage automatically as the system is pushed into the rack and are

released by pulling up on the latches (16).

• To secure the system for shipment in the rack or for other unstable environments,

locate the hard-mount screw under each latch and tighten each screw with a #2
Phillips screwdriver (17).

To route the cables, do the following:
• Locate the inner and outer CMA brackets on the interior sides of both rack flanges

(18).

Summary of Contents for FortiMail-100















































































































































































Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands

Fortinet FortiMail-100, Install Manual

Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands