Fortinet FortiMail-100 Install Manual Download Page 33

Page: 33 / 174

FortiMail-2000B hardware installation

Mounting the FortiMail unit

FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
Revision 2

http://docs.fortinet.com/

•

Feedback

FortiMail-2000B hardware installation

This chapter describes:
•

Mounting the FortiMail unit

•

Installing the cable management arm

•

Installing the hard drives

•

Installing the bezel

•

Connecting the keyboard, mouse, and monitor

•

Connecting the power cables

•

Securing the power cord

Mounting the FortiMail unit

The FortiMail-2000B unit comes with a sliding rail kit. Use the instructions below to install
the rails.

To install the sliding rail kit

Locate the components for installing the rail kit assembly:
• Two sliding rail assemblies (1)
• Two Velcro straps (2)

Caution:

Only trained service technicians are authorized to remove the system cover and

access any of the components inside the system. Before you begin, review the safety
instructions that came with the system.

Note:

The illustrations in this document are not intended to represent a specific server.

Summary of Contents for FortiMail-100















































































































































































Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands

Fortinet FortiMail-100, Install Manual

Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands