Fortinet FortiMail-100 Install Manual Download Page 50

Page: 50 / 174

Connecting the power cables

FortiMail-2000B hardware installation

FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide

Revision 2

http://docs.fortinet.com/

•

Feedback

Figure 17: Connecting the keyboard, mouse, and monitor

Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable to plug into
each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.

Connecting the power cables

Figure 18: Connecting the power cables.

Connect the system’s power cable(s) to the system and, if a monitor is used, connect the
monitor’s power cable to the monitor.

Summary of Contents for FortiMail-100















































































































































































Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands

Fortinet FortiMail-100, Install Manual

Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands