Fortinet FortiMail-100 Install Manual Download Page 39

Page: 39 / 174

FortiMail-2000B hardware installation

Mounting the FortiMail unit

FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
Revision 2

http://docs.fortinet.com/

•

Feedback

Figure 6: Routing the cables

• Bundle the cables gently, pulling them clear of the system connectors to the left and

right sides (19).

• Thread the Velcro straps through the tooled slots on the outer or inner CMA

brackets on each side of the system to secure the cable bundles (20).

Removing the system from the rack

To remove the system from the rack

Locate the lock levers on the front ends of both inner rails (1).

Summary of Contents for FortiMail-100















































































































































































Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands

Fortinet FortiMail-100, Install Manual

Search results

Summary of Contents for FortiMail-100

Reviews:

Related manuals for FortiMail-100

Brands by name

Popular brands