Fortinet FortiMail-100, Install Manual

Page: 54 / 174

Changing FortiMail SW11 switch settings FortiMail-5001A hardware installation
FortiMail™ Secure Messaging PlatformVersion 4.0 Patch 1Install Guide
54 Revision 2
http://docs.fortinet.com/ • Feedback
Changing FortiMail SW11 switch settings
The SW11 switch on the FortiMail board is factory set by Fortinet to detect a shelf
manager (
Figure 20 ). This is the correct setting if you are installing the FortiMail board in a
chassis that contains an operating shelf manager (such as the FortiGate-5140 or
FortiGate-5050 chassis).
Figure 20: FortiGate-5140 and 5050 setting for SW11 (factory default shelf manager mode)
By default a FortiMail board will not start up if the board is installed in a chassis, such as a
FortiGate-5020, that does not contain a shelf manager or that contains a shelf manager
that is not operating. Before installing a FortiMail in a FortiGate-5020 chassis or a chassis
that does not contain an operating shelf manager you must change the SW11 switch
setting as shown in
Figure 21 .
Figure 21: FortiGate-5020 setting for SW11 (standalone mode)
In all cases you should confirm that you have the correct SW11 setting before installing
the board in a chassis.
To change or verify the SW11 switch setting
To complete this procedure, you need:
• A FortiMail board
• A tool for changing the SW11 switch setting (optional)
Table 1: FortiMail SW11 settings for different chassis
Chassis Correct SW11
Setting Result of wrong jumper setting
FortiGate-5140 or 5050 or any
ACTA chassis with an
operating shelf manager
(factory default shelf manager
mode).
1 Off Shelf manager cannot find FortiMail
board. No shelf manager information
about the FortiMail board available.
2 On
3 Off
4 Off
FortiGate-5020 or any ACTA
chassis without an operating
shelf manager (standalone
mode).
1 Off FortiMail board will not start up.
2 On
3 On
4 Off
Factory Default (Shelf Manager Required)
ON
SW11
3 4 2 1
1 Off
2 On
3 Off
4 Off
ON
SW11
3 4 2 1
1 Off
2 On
3 On
4 Off
Standalone Mode for FortiGate-5020
(no Shelf Manager)