Ford Falcon (FG) 2010, Manual

Page: 83 / 264

-83-
Instrumentation
Sub content
Allows the driver to disable/enable the
following items in the Submenu:
• Speed
• Overspeed
• Fuel Used
• Instant Econ
Any item that is disabled will not appear
as you cycle through the Submenu list
(see Section 2. Submenu Display, above)
To disable/enable any item in the list:
1. From the main Settings menu,
toggle to “Sub Content” using the
up / down buttons.
2. With “Sub Content” highlighted,
press the SEL button to select.
3. Cycle to the desired item on the list
above using the up / down buttons.
4. With the desired item highlighted,
press the SEL button to toggle on
or off.
5. Press Menu button to return to the
Settings menu.
Note:
Selecting “Enable All” turns all
items in the list back on.
• DisToDest
• Avg Speed
• Time
• Audio
Reset all
This function returns all screen settings
to the factory default. To reset all:
1. From the main Settings menu,
toggle to “Reset All” using the up /
down buttons.
2. With “Reset All” highlighted, press
the SEL button to return all screen
settings to the factory default.
3. Press Menu button to return to the
Settings menu.
Pop-up warnings
Warning telltales (main display and
instrument panel cluster)
If activated, these warnings are relayed
to the driver in three ways:
1. A dedicated lamp in the instrument
panel cluster.
2. A pop-up in the main display.
3. A corresponding audio chime.
ABS malfunction warning
The lamp illuminates briefly
when the engine is started,
signifying a system check. If
the light does not illuminate when the
ignition is first turned on, does not go
out, or illuminates whilst the vehicle is
being driven, have the system checked
by an Authorised Ford Dealer as soon
as possible. Your brakes will operate
without the ABS function during this
period, provided the brake system
warning light is not illuminated.