manualshive.com logo in svg

Ford Falcon (FG) 2010, Manual

Share
Download
Ford Falcon (FG) 2010 Manual Download Page 229

-229-

• 

Selecting Single Stage Unlocking:

Press and hold the unlock button 
to unlock all the doors and enable 
boot release (where secure boot not 
selected)

4.2 

Unlock Confirm with    

 

Indicators

Unlock Confirm with Indicators will flash 
the indicators once when the vehicle is 
unlocked using the remote key.

Press the OK button to select or 
unselect Unlock Confirm with Indicators.

4.3 

Default Unlocking Settings

Default Unlocking Settings will restore the 
factory default settings for the Unlocking 
menu items. 

Default Unlocking Settings can only be 
selected if the configuration of unlocking 
settings deviates from the default.

Press the OK button to select Default 
Unlocking Settings.

5. Lighting

(Menu > Settings > Lighting)

5.1 

Follow Me Home lighting

When the headlights are in the AUTO 
position, Follow Me Home Lighting 
allows a delay to occur when the key 
is removed from the ignition before the 
headlights turn off. Opening the driver’s 
door will reinitiate this delay. 

Locking the vehicle via the remote key 
will turn the headlights off.

Turn the ICC Control Dial clockwise or 
counterclockwise to adjust the delay 
time for Follow Me Home Lighting.  

Press the OK button to confirm the 
selection.

Interior Command Centre (ICC)

Summary of Contents for Falcon (FG) 2010









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands