Ford Falcon (FG) 2010, Manual

Page: 51 / 264

-51-
Wipers and washers
WIPER AND WASHER
CONTROLS
The following functions are available with
the ignition switch in the ACCESSORY or
ON positions.
Wash/wipe
Pull the lever towards the steering wheel
for more than 0.5 seconds. The wipers
and washers will activate to clear the
screen.
Single wipe
Momentarily push the lever up.
Speed sensitive, variable
frequency intermittent wipe
(INT)
With the ignition switch in the ON
position, the delay between wipes varies
with vehicle speed. As vehicle speed
increases, the time delay between wipes
decreases. This feature also includes
a wipe on take-off function. This wipe
is activated when the vehicle speed
reaches 8km/h in a forward direction.
Push the lever down to the first detent
position.
1. Rotate the control clockwise to
decrease the time delay between
wipes.
2. Rotate the control counterclockwise
to increase the time delay between
wipes.
Low speed wipe (1)
Push the lever down to the second
detent position.
High speed wipe (2)
Push the lever down to the third detent
position.