Ford Falcon (FG) 2010, Manual

Page: 244 / 264

-244-
Note
: Once a second call has been
accepted, the mute function is no longer
available.
Rejecting a second incoming call
Press and hold the PHONE button to
reject the second incoming call.
Swapping between two calls
When two calls have been accepted,
you can swap between the two calls by
pressing the PHONE button. Press the
PHONE button again to swap back.
Note
: If a call terminates while on hold
then the Bluetooth system is unable
to detect the call termination and will
continue to swap between calls, until all
calls are terminated.
Ending a second call
Press and hold the PHONE button to end
the current active call. The other call may
be automatically taken off hold.
Phone and Bluetooth (where fi tted)
Transfer to Handset
Whenever the “Handset” (or “TRN” )
multifunction button status icon appears,
Multifuncion Button M6 can be pressed
to transfer the call to the handset.
WARNING
It is dangerous and may be illegal
to use a hand-held mobile phone
when you are driving. Always pull over to
the side of the road (when safe to do so)
before answering or making a call with a
hand-held mobile phone.
The following message will be displayed:
Note : Manual reconnection on your
mobile phone is required to transfer the
call back to the Bluetooth system while
in call.
Some mobile phones may reconnect to
the Bluetooth system after the current
call is terminated.
M2 M1 M3 M4 M5 M6