manualshive.com logo in svg

Ford Falcon (FG) 2010, Manual

Share
Download
Ford Falcon (FG) 2010 Manual Download Page 232

-232-

7.    Display

(Menu > Settings > Display)

7.1 

Brightness and Contrast

7.1.1

  

Brightness

Note:

 The instrument cluster is the 

master illumination control. Adjusting the 
illumination via the cluster will also affect 
the ICC illumination.

The ICC illumination can be adjusted 
independently from the cluster via the 
brightness slider adjustment bar.

Turn the ICC Control Dial clockwise to 
increase the brightness intensity of the 
ICC screen. 

Turn the ICC Control Dial 
counterclockwise to reduce the 
brightness intensity of the ICC screen.

The screen will flip from day to night 
mode when the headlights are on. 

Interior Command Centre (ICC)

6.3 

Alarm Enable with Remote

Alarm Enable with Remote enables the 
alarm via a press of the lock button on 
the remote keypad.

Press the OK button to select Alarm 
Enable with Remote.

Note:

 Alarm Enable with Remote and 

Alarm Enable with Key Out cannot both 
be selected. Only one of the two can be 
selected at any one time.

6.4 

Alarm Enable with Key Out

Alarm Enable with Key Out enables the 
alarm when the key is removed from the 
ignition barrel.

Press the OK button to select Alarm 
Enable with Key Out.

Note:

 Alarm Enable with Remote and 

Alarm Enable with Key Out cannot both 
be selected. Only one of the two can be 
selected at any one time.

6.5 

Default Alarm Settings

Default Alarm Settings will restore the 
factory default settings for the alarm 
menu. 

Default Alarm Settings can only be 
selected if the configuration of alarm 
settings deviates from the default. 

Press the OK button to select Default 
Alarm Settings.

Summary of Contents for Falcon (FG) 2010









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands