113
Disabling LOCK OTHER/LOCK ALL
Press the lock button again.
To unlock buttons from other units, press and hold the LOCK button for the time
specified in the [Web-based Control:
RU Settings
page].
On the remote control panel:
LOCK LED illuminates
Orange, if a LOCK OTHER command is sent by itself.
Red, if a LOCK OTHER command is sent by another unit.
Red, if a LOCK ALL command is sent by any unit.
The LOCK button is highlighted (background illuminates)
LED and LCD colors of locked current destination buttons are changed to those set under
LockButtonColor
in the [Web-based Control:
RU Settings
page] (MFR-40/ 18/ 39RU,
16RUTA)
To check the
LOCK status
, press the current destination button.
The MENU display shows the LOCK status and the ID number of the unit that has issued the
LOCK command.
The LOCK button and LOCK LED on the remote control unit flash if any inhibited operation
such as selecting a source channel is performed when Lock Other (or Lock All) is enabled
and the LOCK OTHER (or LOCK ALL) button is assigned.
LOCK GROUP
The LOCK OTHER function also enables Group LOCK OTHER, which allows crosspoint
switching by RU units only in the same group and locks RU switching in other groups. Any
RU in the same group can lock or release the LOCK OTHER command. LOCK ALL disables
crosspoint switching from all remote control units and can be unlocked only by remote control
units in the same group.
<LOCK GROUP Setting Example>
This example creates the following three groups from five RU units as shown below using the
Unit ID and Group ID numbers.
1. Open the [Web-based Control:
Lock Destination
page]. Add RU [100], RU[101] and
RU[102] to Group A.
2. Add RU [103] and RU[104] to Group B.
DST: 8 [DST8 ]
LK-ID: 103[OTHER PANELS]
LOCK OTHER ON
DST: 8 [DST8 ]
LK-ID: 103[ALL PANELS ]
LOCK ALL
DST: 8 [DST8 ]
LK-OFF [NOT LOCKED ]
LOCK OFF
If LOCK OTHER or LOCK ALL is ON:
RU [102]
RU [103]
RU [100]
RU [101]
RU [104]
RU [105]
Group A [200]
Group B [201]
