409
Co
nv
e
n
ie
nt Fu
nc
ti
on
s
2
Press
l
(
).
≥
The following icons appear on the display depending on the setting:
: Repeats daily.
: Repeats on the specified day of the week.
Tone
1
Select a type of alarm tone
1
Select a folder
1
Select an alarm tone.
Volume
1
Use
B
o
to adjust the volume.
≥
If you set “Step”, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
Snooze
You can set whether to activate Snooze. If you set to “OFF”, set
the duration that the alarm tone is to continue sounding.
1
ON or OFF
1
Enter a ring time (minutes).
≥
You can enter from “01” through “10” in two digits.
≥
See page 410 for how Snooze works.
Auto power ON
You can set whether to turn on the power automatically to make
an alarm sound when the alarm time arrives during power off.
1
ON or OFF
Prefer manner
mode
You can set the alarm tone which sounds at the specified time
during Manner Mode.
1
ON or OFF
ON
. . . . . Sounds at the same volume as set for “Alarm volume”
on page 113.
OFF
. . . . Sounds at the volume set for this function.
Item
Operation/Explanation
Function Menu while Alarm is Displayed
Function menu
Operation/Explanation
Edit
Go to step 1 of “Using Alarm” on page 40
8
.
Detail
You can display the stored alarm contents.
Set this
You can validate the stored alarm.
1
YES
≥
You can validate also by pressing
O
o
(
).
The icon appears on the desktop.
“
”. . . . . Displayed when an alarm is set for today (except the setting for past time).
“
”. . . . . Displayed when an alarm is set for tomorrow or onward only.
≥
If you set “Alarm” of a schedule event/ToDo item to “OFF”, the icon is not displayed.
Set all
You can validate all the stored alarm.
1
YES
Release this
You can invalidate the stored alarm.
1
YES
≥
You can invalidate also by pressing
O
o
(
).
Release all
You can invalidate all the stored alarm.
1
YES
Function menu
Operation/Explanation
Information
≥
If the alarm tone sounds during a call, press any key to stop it. Once again press any
key to end the alarm including Snooze. If the other party on the phone hangs up, an
alarm including Snooze ends.
≥
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
≥
If any of the following events occurs in Snooze state, Snooze is released:
・
When you receive a voice call, videophone call, or PushTalk call
・
When you receive a mail message or Message R/F while “Receiving display” is set
to “Alarm preferred”
・
When you receive a location provision request while “Location request menu” or the
setting by service is set to other than “OFF”
・
When an alarm tone of “Schedule”, “ToDo”, “Book program” or “Timer recording”
sounds
≥
When you set the power to automatically turn on and an alarm to sound, the default
alarm tone sounds if the alarm with the UIM security is selected.
≥
Turn off the FOMA phone after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for “Alarm”, “Schedule”, and “ToDo”
Summary of Contents for P906i
