Foma P906i, Instruction Manual

Page: 433 / 627

431
Co
nv
e
n
ie
nt Fu
nc
ti
on
s
When you connect your FOMA phone to a Bluetooth device using Audio
service, you can output the sound of moving images or video, music via
MUSIC Player, etc., from the Bluetooth device.
1
Connect a Bluetooth device using Audio service.
≥
See page 42 8 for connecting to a Bluetooth device.
≥
If you connect using Audio service from the Bluetooth device while placing an
Audio service on standby for connection, MUSIC Player starts automatically.
However, it might not start automatically when a display other than Stand-by
display is shown or another function is activated.
≥
If the audio from a 1Seg program stops while it is output on the Bluetooth device,
check your FOMA phone as the possible causes are as follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･
When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “Book program” or “Timer
recording” sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
Play Back Sound/Music of Moving Image or Video Using
Bluetooth Device
Information
2
Play back a moving image, video or music file.
The sound is output from the Bluetooth device.
≥
When the confirmation display appears asking whether to start output to the
Bluetooth device, select “YES”.
≥
Once you connect the FOMA phone to the Bluetooth device using Audio service,
a connection history is stored. When the connection history is found, the FOMA
phone tries to connect to the Bluetooth device automatically for playing back a file
even if it is not connected using Audio service. When a connection is successfully
completed, the sound is output from the Bluetooth device. When the connection
fails, the confirmation display appears asking whether to output sound from the
FOMA phone. However, it cannot connect to automatically for playing back an
i-motion movie.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
≥
For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
Information
≥
You can output the audio of video file only on an A2DP compatible Bluetooth device
that supports copyrighting by the SCMS-T.
≥
While you are playing back the sound of a moving image, video, or music file from a
Bluetooth device, you cannot adjust the sound volume by adjusting that on your
FOMA phone.
≥
Even when you are using Play Background for MUSIC Player or Music&Video
Channel, the remote-control operation for Bluetooth device is available.
≥
You cannot output the audio from the Bluetooth device when the Flat-plug Stereo/
Earphone Set (option) or Flat-plug Earphone/Microphone with Switch (option) is
connected.
≥
If the sound of a moving image, video, or music file stops while it is played back on the
Bluetooth device, check your FOMA phone as the possible causes are as follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･
When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “Book program” or “Timer
recording” sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.