65
Vo
ic
e/V
ideo
p
h
one
Cal
ls
When a caller’s phone number is provided
If you store the caller
’
s name, phone number, and image in the Phonebook, the name,
phone number, and icon (or image) are displayed.
≥
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 9
8
) is displayed.
≥
The phone number but not the name is displayed during Personal Data Lock.
≥
For a forwarded call, the forwarder
’
s phone number is displayed below the caller. (It
might not be displayed in the case of some forwarders.)
≥
When you receive a call to an additional number of Multi Number, the stored name for
the additional number is displayed below the caller. (With a forwarded call, you can
press
c
(
) to switch to display of the forwarder.)
When a caller’s phone number is not provided
The reason for no caller ID is displayed. (See page 144)
<For Voice Calls>
≥
When “Answer setting” is set to “Any key answer”, the call is placed on hold if you
answer the call by pressing
.
<
with the FOMA phone closed. If you have set “Setting
when closed” to “No tone” or “End the call”, the other party hears nothing, and if you
have set “Setting when closed” to “Tone on”, the call hold tone is played back. You
can start talking by opening the FOMA phone.
<For Videophone Calls>
≥
Just after purchase, Hands-free is automatically activated during a videophone call as
“Hands-free w/ V. phone” has been set to “ON”. (See page 77) However, Hands-free
is deactivated during Manner Mode regardless of “Hands-free w/ V. phone”.
≥
Even if Call Forwarding Service is set to “Activate”, the call is not forwarded unless the
forwarding destination is a phone compatible with the videophone conforming to
3G-324M (see page 50). Check the phone you are forwarding the call to and then
activate the service. The videophone caller does not hear the guidance to the effect
that the call is forwarded. (The message to the effect that the call is to be forwarded
appears, depending on the receiver
’
s FOMA phone.)
≥
If a videophone call comes in from the phone number to be rejected by Nuisance Call
Blocking Service, the video guidance for Call Rejection is played back and the call is
disconnected.
≥
You can send a Chara-den image to the other party instead of the image through your
camera. (See page 74)
Display for incoming calls
Information
When you have set “Notify switchable mode” to “Indication ON”, the
caller (the other party) can switch between a voice call and videophone
call.
≥
You (receiving end) cannot switch between a voice call and videophone call.
1
The display for switching to a
videophone call appears during a voice
call.
YES
. . .Sends the image through your camera to the
caller.
NO
. . . .Sends a pre-installed substitute image to the
caller.
≥
While switching, the message to that effect is displayed
and the voice guidance is played back.
When the caller (the other party) switches a videophone call to a voice
call, the message telling that the call is being switched appears, the voice
guidance is played back, and then the call is switched to a voice call.
Function Menu while a Call is Ringing
Function menu
Operation/Explanation
Call rejection
You can disconnect the call without answering.
Call forwarding
See page 451.
Voice mail
See page 447.
Switched between a Voice Call and
Videophone Call by the Other Party
Switched from a Voice Call to Videophone Call by the
Other Party
Switched from a Videophone Call to Voice Call by the
Other Party
Summary of Contents for P906i
