Foma P906i, Instruction Manual

Page: 446 / 627

444
Cha
racter En
try
When you press two numeric keys to enter two-digit numerals, a
character (symbol) that corresponds to the numerals is entered. Press
the first key to list candidate characters (symbols) at the lower part of the
display. To list candidate characters, you need to set “2/NIKO-touch
guide” to “ON” in advance.
≥
See page 502 for how characters are assigned to the numeric keys (2-touch).
≥
See page 436 for switching to “2-touch”.
Press
l
( ) from the Character Entry (Edit) display to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
<Example> Enter “ タダの菓子 ” in a text memo.
1
m 1
Stationery
1
Text memo
1
Select <Not recorded>.
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/Hiragana input mode.
た→
41
だ→
41
,
a
の→ 55
か→
21
し→
32
≥
To enter “ ゛ ” or “ ゜ ”, enter the character and then press
a
.
≥
Press
80
to switch between uppercase and lowercase. You can switch
uppercase and lowercase also by entering the character that can be switched
between uppercase and lowercase and pressing
d
.
After entering hiragana characters, go to step 3 on page 437.
<Mode 2 (2-touch)>
Entering Characters in Mode 2 (2-touch)
Switch Input Modes (2-touch)
Enter Characters
When you press two numeric keys to enter two-digit numerals, a
character (symbol) that corresponds to the numerals is entered. Press
the first key to list candidate characters (symbols) at the lower part of the
display. To list candidate characters, you need to set “2/NIKO-touch
guide” to “ON” in advance.
≥
See page 503 for how characters are assigned to the numeric keys (NIKO-touch).
≥
See page 436 for switching to “NIKO-touch”.
Press
l
( ) from the Character Entry (Edit) display to switch input
modes. You might not be able to switch to some modes depending on
the function you enter.
<Example> Enter “ タダの菓子 ” in a text memo.
1
m 1
Stationery
1
Text memo
1
Select <Not recorded>.
The Character Entry (Edit) display appears.
2
Enter hiragana characters in Kanji/Hiragana input mode.
た→
41
だ→
41
,
a
の→ 55
か→
21
し→
32
≥
To enter “ ゛ ” or “ ゜ ”, enter the character and then press
a
.
≥
Enter the character that can be switched between uppercase and lowercase and
press
d
; then you can switch.
After entering hiragana characters, go to step 3 on page 437.
<Mode 3 (NIKO-touch)>
Entering Characters in Mode 3 (NIKO-touch)
Switch Input Modes (NIKO-touch)
Enter Characters