Fogo Montanha E601, Instruction Manual

Page: 43 / 65

43
3.15 Except as expressly provided by law, a warranty intervention does not renew the warranty period of the
Product. The rights arising from the Warranty are not transferable to the purchaser of the Product.
3.16 The equipment must be installed in accessible places and without risk to the technician. The means
necessary for access to them shall be made available by the Buyer, and the Buyer shall be responsible for any
charges arising therefrom.
3.17 The Warranty is valid for the Products and equipment sold by Fogo Montanha solely and exclusively within
the geographical and territorial zone of the country where the Product was sold by Fogo Montanha.
4. Circumstances that exclude the application of the Warranty
Excluded from the Warranty, being the total cost of the repair borne by the Buyer, the following cases:
4.1. Products with more than 2000 operating hours;
4.2. Refurbished and resold products.
4.3. Maintenance operations, Product settings, commissioning, cleaning, elimination of errors or anomalies
that are not related to deficiencies of equipment components and replacement of the batteries
4.4. Components in direct contact with fire such as: vermiculite supports, deflector or protective plates,
vermiculite, sealing lanyards, burners, ash drawers, wood chips, smoke registers, ash grates, whose wear is directly
related to the conditions of use. Degradation of the paint, as well as corrosion due to degradation of the paint, due
to overloading of fuel, use of an open drawer or excessive drainage of the installation chimney (the chimney must
respect the drawing recommended in the Product Technical Data Sheet). Glass breakage due to improper handling
or other reason not related to Product deficiency. In the pellet family, the ignitors are aware part, so they are only
guaranteed for 6 months, or 1000 ignitions (whichever comes first);
4.5. Wear considered components, such as bearings and bushes;
4.6. Deficiencies of components external to the Product that may affect its correct functioning, as well as
material or other damages (e.g. tiles, roofing, waterproofing, pipes, or personal injury) caused by improper use of
materials in the installation or by non-execution of the product installation in accordance with the rules for the
installation, applicable regulations or rules of good art, in particular when the application of suitable piping to the
temperature in use, expansion vessels, non-return valves, safety valves , anti-condensation valves, among others;
4.7. Products whose operation has been affected by failures or deficiencies of external components or by poor
sizing;