21
10. Controls
10.1. Combustion air inlet (A)
The cold air intake is made under the unit, so the unit will get cold air from the room where it is installed, see
Figure 20.
Figure 20 - Cold air intake underneath the equipment
The equipment also comes with a covered cold air intake on the back, if you want to install it to the outside air, you
will have to break the micro-junctions of the covers and make the connection to one of the air intakes options,
from the back or the bottom, if you choose the back, you will have to change the cover, passing it to the bottom,
see Figure 21.
Note:
If the installation is connected to outside air, an adapter must be purchased according to the air inlet
diameter of the unit.
Figure 21 - Connection options to the "Outside air intake kit" equipment
Breaking the micro-
junctions
Outdoor air
connection
Summary of Contents for E601
Page 65: ......
