23
NOTE:
If you intend to use the fan convection hot air regulator, before installing the unit, you must tighten the locking
screw, to allow the flap operation to be unlocked, see Figure 24.
Figure 24 - Fan convection hot air flap locking screw
10.3. Combustion air control "Primary Air" (C)
This controls the amount of combustion air “Primary Air” entering the stove, thus controlling the heat output. It is
located in the lower left corner of the door.
To open - Pull the regulator with the key that comes in the equipment, for greater yield and greater
consumption of firewood, see Figure 25-a.
To close - Push the regulator for lower efficiency and low wood consumption.
This also creates a high velocity wash effect of the preheated air over the entire inner surface of the glass panel,
helping to keep the glass cleaner for longer, see Figure 25-b.
a)
b)
Figure 25 - a) Open Primary Air, b) Close Primary Air
Summary of Contents for E601
Page 65: ......
