Fogo Montanha E601, Instruction Manual, Page: 11 / 65

11
1. Protect the surface on which you are going to work. Join the four legs of the table with four DIN 912
M8x20mm screws as shown in Figure 2.
Figure 2 - Auxiliary table assembly
2. Place one of the short interlocks from the inside of one of the leg extensions and insert between the two
leg extensions on one side, as can be seen in the picture below. Place one of the long locks from the outside and
secure the assembly with a DIN 912 M8x20mm screw. Do not tighten the screw with force, to facilitate the rest
of the assembly of the assembly. The leg extension has 5 holes, you must select which to apply, as well as, the
total height of the table, as shown in Figure 3.
Figure 3 - Auxiliary table assembly