15
10.
You can then insert the equipment into place, as shown in Figure 12.
Figure 12 - Placing the equipment on site
11.
After placing the unit in place, it should have a distance of 40 mm from the face of the plasterboard or
masonry to the front face of the unit, so that when you install the frame, it will be well installed, see Figure 13.
Figure 13 - Distance of the equipment from the plasterboard or masonry face
12.
The next step is to fix the equipment to the table, which can be accessed in two ways, Figure 14.
- (a) From the front area of the equipment at the bottom, if you find it difficult to access from the front,
you can still remove the lower front panel by loosening the side screws.
Summary of Contents for E601
Page 65: ......
