Comark RF500A/AP Service Manual
Appendix E – RF500A/AP Hidden Commands
Appendix E – RF500A/AP Hidden Commands
The RF500A/AP contains hidden service and diagnostic level commands which can be useful.
THESE COMMANDS CAN POTENTIALLY WIPE STORED DATA ON THE RF500A/AP
ONLY USE IF ABSOLUTLY NECASSARY
Clear Data Commands
clr-data
This command will clear all data and settings on the RF500A/AP with the exception of the IP address and reset and
reinitialise the SD cards (both cards will be given new ID's to be a matched pair). The command is called from:
•
Administration → Gateway Name
•
Enter the command clr-data in both the Password and Gateway Name fields
The RF500A/AP will now display the following screen and then reboot.
Once rebooted the data and settings will be cleared.
17 November 2011
Page 58 of 65
Enter clr-data
Enter clr-data
