Fluke Biomedical Index 2MF, User Manual

Page: 14 / 126

Index 2MF
Users Guide
1-2
Note
The Simulator is not intended to be a pulse oximeter calibrator.
Index 2MF Features
•
Conduct saturated peripheral oxygen (SPO
2
) simulations with saturation levels
between 35% and 100% (in 1% increments)
•
Complete probe and electronics assembly testing either optically or electrically (FE
version only)
•
Probe continuity check (MFE version)
•
Variable heart rate settings from 30 beats per minute to 250
•
Preset simulations reproduce several patient conditions
•
Alarm tests for response time, recovery time, and pulse amplitude
•
Portable, weighing in at under 3 pounds, with a 10" x 10" footprint
•
Programmable auto sequences
•
Computer controllable
•
Menu driven with softkey interface and 2-line by 24-character LCD (liquid crystal
display) supertwist, alphanumeric display
•
Rechargeable lead acid battery, with 8 hours of continuous operation and built-in low
battery indicator
Package Contents
The contents of the Simulator package as shipped include:
F Version
•
Index 2MF Pulse Oximeter Tester
•
Battery Charger
•
User's Guide and Registration Card
FE Version
•
Index 2MF Pulse Oximeter Tester
•
Battery Charger
•
Users Guide and Registration Card
•
Ohmeda and Nellcor Probe and Oximeter Adapter (electrical cables)
Registration Card
Once the the Simulator is successfully up and running, complete the postage-paid
registration card and mail it to Fluke Biomedical.
Precautions
Observe these precautions when using the Simulator; like any electronic equipment, it
should be adequately protected both when moving and in storage.
W
Caution
When connecting the Simulator to a peripheral, such as a PC’s
RS232 serial port or printer, power OFF both the Simulator and
the peripheral device during connection and disconnection.
Failure to follow this precaution may result in damage to the
equipment.