6.5.4
Probe Commands
This group of commands deals with temperature conversion and probe charac-
terization. The commands are summarized in Table 13. None of the probe pa-
rameters are affected by the *RST command.
Command
Action
CALCulate[n]:CONVert:CATalog?
Query available conversion types
CALCulate[n]:CONVert:COPY <channel>
annel
Copy conversion parameters from another channel
CALCulate[n]:CONVert:DATA?
Query output of conversion block
CALCulate[n]:CONVert:NAME <convert_name>
Select the conversion type
CALCulate[n]:CONVert:NAME?
Query the conversion type
CALCulate[n]:CONVert:PARameter:CATalog?
Query a list of conversion parameters
CALCulate[n]:CONVert:PARameter:VALue
<parameter_name>,<numeric_value>
(;<parameter_name>,<numeric_value>...)
Set conversion parameter values
CALCulate[n]:CONVert:PARameter:VALue?
<parameter_name>
Query the value of a conversion parameter
CALCulate[n]:CONVert:PARameter:VALue? ALL
Query the values of all conversion parameters
CALCulate[n]:CONVert:SNUMber <serial_number>
Set the probe serial number
CALCulate[n]:CONVert:SNUMber?
Query the probe serial number
CALCulate[n]:CONVert:SRLow
<sub-range_number>
Select a low ITS-90 sub-range
CALCulate[n]:CONVert:SRLow?
Query the low ITS-90 sub-range
CALCulate[n]:CONVert:SRHigh
<sub-range_number>
Select a high ITS-90 sub-range
CALCulate[n]:CONVert:SRHigh?
Query the high ITS-90 sub-range
CALCulate[n]:CONVert:TEST? <numeric_parame-
ter>
(,<numeric_parameter>)
Test the conversion calculation
81
6 Digital Communications Interface
Commands
Table 13
Probe Command Summary
