9500B
Calibration Manual
88
Standard Calibration — Basic Sequences
This section describes in more detail the main processes involved when calibrating each
of the Model 9500B's 'hardware configurations' from the instrument's front panel.
•
Introduction
o
Aim of Calibration
o
General Calibration Process
•
Target Selection Screen — Selecting Hardware Configurations
o
Waveform Selection
o
Hardware Configurations
o
Channel Selections
o
Retained Channel Memory
o
'Default' or 'Saved' Targets
•
The Adjustment Screen
o
Setting Target Values
o
Selecting Default Calibration Targets
o
Modifying a Calibration Target
•
Calibrating the Model 9500B at Target Values
o
Adjust Output Amplitude
o
Target Selection
o
'RESET CAL POINT'
•
Standard Calibration of AC Functions
o
Output Frequency Synthesis
o
Changing the Output Frequency of Target Calibration Points
•
Exit from Calibration - Cal Date and Cal Due Date
o
Exit: Mode Key — Warning Screen
o
Exit Only
o
Update the Date Stamp on a Certificate
o
Setting the Cal Due Date and Advance Warning Period
