BE6000 Ultrasonic Flow Meter O&M Manual
Flomotion Systems, Inc. ~ FlomotionSystems.com
6
I. Introduction
1. Preface
Welcome to BE6000 series ultrasonic flow meter. Please read this instruction manual thoroughly before
installation and operation.
BE6000 ultrasonic flow meter is a time-difference type ultrasonic flow meter, whose transducers are mounted
clamped on pipe. It measures clean, well-distributed flows of liquids
those content of suspended particles is not very high.
The system is configured as below;
•
Sensor Set
: A pair of ultrasonic transducers mounted on the external surface on a pipe.
•
Processor
: The processor and the transducers are connected by two double shield high frequency
cables. The processor can be monitored and controlled remotely through a PC connected via
Internet. The following illustrates the configuration of the processor unit and the transducer sets;
2. Characteristics
BE6000 ultrasonic flow meter is based on single-board technology featuring high accuracy, reliability and
repeatability. The merits it provides above else are;
•
Transducers are not intrusive. Therefore there’s no pressure drop. They are mounted on the outside
wall of the pipe.
•
Advanced intelligent instrumentation, processing and printing (logging) according to user
requirements. Almost all common flow units are used. It uses normal power, built-in battery or DC
power, etc.
•
It uses the most advanced direct time measurement method with the resolution of 0.2 ns. Coupled
with the advanced data processing functions, it provides high level of linearity.
•
Various output options available including analog current output, frequency output, RS-232 serial
output, relay output, etc. The output options can be set by a menu or via a PC connected to the
processor through a RS-232C.
