BE6000 Ultrasonic Flow Meter O&M Manual
Flomotion Systems, Inc. ~ FlomotionSystems.com
21
If ‘9. Other’, you must input the corresponding sound velocity of the material in M15.
•
Pipe Sound Velocity(M15)
Use this menu only when ‘9. Other’ is selected in M14. This menu is not activated if ‘9. Other’ is
not selected in M14.
•
Liner Material(M16)
You can select one of the following materials from the list provided;
0. No Liner
6. Polystyrene
1. Tar Epoxy
7. Polyester
2. Rubber
8. Polyethylene
3. Mortar
9. Ebonite
4. Polypropylene
10. Teflon
5. Polystrol
11. Other
If ‘11. Other’, you must input the corresponding sound velocity of the material in M17.
•
Liner Sound Velocity(M17)
Use this menu only when ‘11. Other’ is selected in M16.
•
Liner Thickness(M18)
Only when a liner is selected in M16, this menu will be activated.
•
Inside ABS Thickness(M19)
Input ABS roughness coefficient. Not used. Reserved for future use.
•
Fluid(M20)
Pipe Sound Velocity
1300.5 m/s
Liner Material
0. No Liner
Liner Sound Velocity
3300.5 m/s
Liner Thickness
10mm
Inside ABS Thickness
0
