68
Enabling the Self Serve Mode
Enabling the Self Serve Mode adds a command
to “make selections” on the main screen. It also
makes the SETUP key invisible (although it is
still active in the upper left corner), disables the
Timed Serving Size option, and also disables
the Injector Flush option.
It is recommended that the Dispense Instruction
Screen be used when the Self Serve Mode is
active. It is also recommended that the Pass
Code feature is enabled to prevent an
unauthorized operator from accessing the setup
and maintenance functions. See ENABLING
THE PASS CODE FEATURE for more
information.
1. Press the SETUP key in the upper left
corner. Enter the password if required.
2. Press the MAINTENANCE key.
3. Press the SETUP OPTIONS key.
4. Select ENABLE SELF SERVE MODE and
also ENABLE DISPENSE INSTRUCTION
SCREEN by touching the box so the check
mark appears.
NOTE:
INJECTOR FLUSH AND TIMED
SERVING SIZE ARE NOT COMPATIBLE
WITH THE SELF SERVE MODE. ENABLING
FCB PURGE IS RECOMMENDED.
NOTE:
“ENABLE AUTO DISPENSE MODE” IS
FOR USE WITH THE FCB AUTO DRAW
VALVE SYSTEM AND REQUIRES A SPECIAL
KIT ASSEMBLY FROM YOUR LOCAL
DISTRIBUTOR.
NOTE:
ENABLING THE DISPENSE SCREEN
IS RECOMMENDED (HOWEVER, NOT
ESSENTIAL) WHEN USING THE SELF
SERVE MODE. DESELECTING THE
INSTRUCTION SCREEN WILL ELIMINATE
THE “NEXT” KEY IN THE CORNER AND THE
OPERATOR WILL HAVE TO SIMPLY DRAW
THE SERVING WITHOUT BEING
INSTRUCTED TO DO SO.
Summary of Contents for TS 80FCB
