55
Setting Serving Size Timing
The TS 80FCB has a program functioned into
the electronics that allows the operator to have
the flavor flow shutoff automatically at a preset
time while drawing a serving. The operator
simply determines the length of time it takes to
draw a desired serving size and then programs
the sizes into the Touchscreen.
Setting the
serving size timing is only necessary when the
TS 80FCB system is set to run based on
serving size (see “Serving Mode Options”).
Ensure that the freezer is set to the desired
product flow rate according to the freezer
manufac
turer’s instructions.
1. Using a stop watch, record how long it takes
to draw each serving size according to your
preference (small, medium, large and extra-
large). Start timing from the moment the
draw handle is open fully to the time it is
closed.
2. The Touchscreen should show Small,
Medium, Large and Extra Large keys above
the menu flavors. If not, follow the
instructions in the previous section
“Enabling the Timed Serving Size Draw
Mode.”
3. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
4. Press the MAINTENANCE key.
5. Press the ADJUST SERVING SIZES key.
NOTE:
IF THE SERVING TIMES SETUP KEY
IS NOT SHOWING IN THIS MENU, SEE
PREVIOUS SECTION “ENABLING THE TIMED
SERVING SIZE DRAW MODE” AND FOLLOW
STEPS 3, 4, AND 5.
Summary of Contents for TS 80FCB
