28
4. The system is now in the Prime Syrup
function mode.
NOTE:
IF THE FLAVORS INSTALLED ARE
DIFFERENT THAN THE FLAVORS SHOWN
ON THE MENU, YOU WILL NEED TO
CHANGE THE TOUCHSCREEN MENU LABEL
FOR THAT SYRUP LINE. SEE THE
“TOUCHSCREEN OPERATIONS –
ASSIGNING FLAVORS TO THE MENU” FOR
INSTRUCTIONS.
NOTE:
INJECTOR FLUSH KEY IS INTENDED
FOR USE WITH NON-FCB SYSTEMS.
DO
NOT PRESS INJECTOR FLUSH
, AS AIR
AND/OR PRODUCT WILL DISPENSE FROM
THE SPOUT FOR SEVERAL SECONDS AND
SERVES NO SPECIFIC PURPOSE WITH THE
FCB SYSTEM.
5. To prime the syrup line, place a container
under the spout. Press the key of the flavor
and allow the syrup to flow to flush out the
sanitizer solution and any air pockets.
6. Once syrup flows consistently from the
spout, press the flavor key again to
complete the procedure.
7. Repeat Steps 5-6 for the rest of the flavors.
8. When no additional flavors need to be
installed, draw a serving to clear the door
spout opening of any residual flavor.
9. Press DONE to exit the Prime Syrup Pump
mode and return to the main screen.
Summary of Contents for TS 80FCB
