54
6. The main screen will show four serving size
choices above the flavor list.
7. To adjust the size for each individual size,
see the “Setting Serving Size Timing”
section.
Dispensing Product
– Timed Serving Size
Draw Mode
With the timed serving size draw mode, the
flavors selected will automatically shut off after
the draw handle is open to dispense for a
preset time and a beep alerts the operator to
close the draw handle. This helps eliminate
carryover issues between servings. The timing
for each serving size can be adjusted as
instructed in the section “Setting Serving Size
Timing.”
1. Select the serving size key (Small, Medium,
Large, Extra Large). The system will default
to the Medium size if no other size is
selected.
NOTE:
IF YOU TOUCH AND DESELECT THE
MEDIUM SIZE (IE, ALL SIZES ARE
DESELECTED), THE FLAVOR WILL
DISPENSE AS LONG AS THE DRAW
HANDLE IS OPEN, AND NO BEEPING
SOUND WILL ALERT THE OPERATOR TO
STOP THE SERVING. THIS HAS THE SAME
EFFECT AS USING THE STANDARD
MANUAL DRAW MODE.
2. Select the desired flavor(s) from the
Touchscreen.
3. In one smooth motion, draw a serving to
dispense product. Flavor will automatically
dispense as the product is served.
4. When the system beeps to indicate the
serving size is reached, move the draw
handle into the “closed” position. Flavor
flow automatically ceases just before the
beep, allowing unflavored product to
dispense briefly to clear the spout so that
flavor carryover to the next serving is
minimized. There may be a small amount
of unflavored product topping the serving as
a result.
7. If no flavor is desired (i.e.
– to draw vanilla),
simply deselect any selected flavor entry by
pressing it. Select a serving size and draw
a serving until a beep sounds.
Summary of Contents for TS 80FCB
